WHAT IS SKILLS RECOGNITION & RPL:
Skills Recognition and Recognition of Prior Learning (RPL) allows people like you to achieve this qualification without any classroom study, and usually within weeks.
In order to obtain this qualification so quickly, all you need to do is supply evidence which proves your experience in the units that make up the qualification. Our Skills Recognition & RPL Facilitators will assist you with this process. From there, we’ll work with our RTO partners so that you’ll receive your qualification in no time!
Watch our video to learn more about the process, or continue reading to learn more about RPL.
DETAILS:
RPL Price: $3200
Who This Is For:
In order to achieve this qualification via Skills Recognition & RPL, you should be able to perform or have a strong knowledge of the skills listed in the course units below. You will need to be able to provide evidence of this knowledge, such as videos, photographs, work orders, your resume, letters of validation, and statements of attainment. The more evidence you can provide, the better your case. Feel free to read more about RPL and evidence suggestions here.
Why Get Qualified Australia:
We provide candidates with Skills Recognition & RPL services nationwide. You never need to visit our office, nor do you have to sit in a classroom. Our 100% money back guarantee ensures that, if we can’t get you qualified, you can get your money back. Please refer to our terms & conditions for more details. As Australia’s leading Skills Recognition & RPL Specialists, we offer hundreds of qualifications via dozens of our RTO partners..
How To Achieve This Qualification:
As this is not a course, you do not need to complete the units listed below. Instead, you simply need to prove that you’re competent in the units shown. Our Facilitators will help make this an easy process for you.
Want to know if you’re eligible to obtain this qualification via Skills Recognition & RPL? Then why not start a Free Skills Review today, and speak with an RPL Specialist to determine your eligibility. Take the initiative today. It only takes 3 minutes!
Units of Competency:
You’ll need to show you’re experienced in the following units:To be awarded the MSF31113 Certificate III in Cabinet Making, competency must be achieved in
twenty-eight (28) units of competency.
six (6) core units of competency
twenty-two (22) elective units of competency.
Note: Units marked with an asterisk have one or more prerequisites and must be considered in the total number of units. Please refer to individual units for details.
CORE UNITS
MSAENV272B Participate in environmentally sustainable work practices
MSAPMSUP102A Communicate in the workplace
MSAPMSUP106A Work in a team
MSFFM2001 Use furniture making hand and power tools
MSFGN2001 Make measurements and calculations
MSFGN3001 Read and interpret work documents
ELECTIVE UNITS
Group A
Select a minimum of one (1) unit from Group A.
CPCCOHS1001A Work safely in the construction industry
MSAPMOHS200A Work safely
Group B
Select a minimum of eight (8) units from Groups B and D for Pathway 1 - Furniture
MSFFF2004 Prepare surfaces for finishing
MSFFM2002 Assemble furnishing components
MSFFM2005 Join solid timber
MSFFM2006 Hand make timber joints
MSFFM3002 Construct furniture using leg and rail method
MSFFM3005 Fabricate custom furniture
MSFFM3006 Install furnishing products
Group C
Select a minimum of eight (8) units from Group C and D for Pathway 2 - Kitchens and Bathrooms
MSFKB2001 Prepare for cabinet installation
MSFKB3001 Identify processes in kitchen and bathroom projects
MSFKB3002 Determine requirements for installation of cabinets
MSFKB3003 Check and measure fit of cabinets
MSFKB3004 Conduct on-site adjustments to cabinets and components
MSFKB3005 Fabricate cabinets for the built-in environment
MSFKB3006 Install fitted cabinets and components
Group D
BSBCUS301B Deliver and monitor a service to customers
MSFFM2003 Select and apply hardware
MSFFM2010 Set up, operate and maintain basic static machines
MSFFM2011 Apply manufactured board conversion techniques
MSFFM3010 Prepare cutting list from plans and job specifications
MSFFM3021 Set up, operate and maintain computer numerically controlled (CNC) sizing machines
MSFFM3022 Set up, operate and maintain computer numerically controlled (CNC) machining and processing centres
MSFGN3002 Estimate and cost job
MSS402030A Apply cost factors to work practices
Group E
Select a minimum of eight (8) units from Group E.
CUVACD302A Produce computer-aided drawings
MSAPMOPS363A Organise on-site work
MSAPMPER200C Work in accordance with an issued permit
MSAPMSUP390A Use structured problem solving tools
MSFFF2006 Apply surface coatings by spray gun
MSFFM2012 Set up, operate and maintain pressure and clamping machines
MSFFM3001 Construct chair and couch frames
MSFFM3003 Produce angled and curved furniture using manufactured board
MSFFM3004 Produce angled and curved furniture using solid timber
MSFFM3007 Prepare and apply decorative surfaces for furniture
MSFFM3008 Select timbers for furniture production
MSFFM3009 Produce manual and computer-aided production drawings
MSFFM3011 Measure and draw site layout for manufactured furniture products
MSFFM3012 Set up, operate and maintain sawing machines
MSFFM3013 Set up, operate and maintain drilling machines
MSFFM3014 Set up, operate and maintain joining machines
MSFFM3015 Set up, operate and maintain planing and finishing machines
MSFFM3016 Set up, operate and maintain multi-head planing and moulding machines
MSFFM3017 Set up, operate and maintain routing and shaping machines
MSFFM3018 Set up, operate and maintain mechanical wood-turning lathes
MSFFM3019 Set up, operate and maintain automated edge banding machines
MSFFM3020 Fabricate synthetic solid surface products
MSFFM3023 Produce and maintain cutting tools
MSFFM3024 Construct jigs and fixtures
MSFFT4001 Coordinate on-site installation of furnishing products
MSFFT4007 Sample, inspect and test products to specifications
MSFFT4008 Interpret and use workplace information
MSFFT4009 Match furnishing style and materials to customer requirements
MSS402001A Apply competitive manufacturing practices
MSS402002A Sustain process improvements
MSS402010A Manage the impact of change on own work
MSS402020A Apply quick changeover procedures
MSS402021A Apply Just in Time procedures
MSS402040A Apply 5S procedures
MSS402050A Monitor process capability
MSS402051A Apply quality standards
MSS402060A Use planning software systems in operations
MSS402061A Use SCADA systems in operations
MSS402080A Undertake root cause analysis
MSS402081A Contribute to the application of a proactive maintenance strategy
TLID2003A Handle dangerous goods/hazardous substances
Group F
Up to five (5) relevant units may be chosen from units not already selected from Groups A to E, or units available in this Training Package or other endorsed Training Packages and accredited courses. Those units must be aligned at Certificate II level (maximum 1 unit), Certificate III level (maximum 5 units) or Certificate IV level (maximum 1 unit).
Units selected from other Training Packages and accredited courses via Group F must be relevant to the qualification outcome and not duplicate units available within this qualification.
Awarded By
RTO
AAA Swiss Training (Code 40935)
All Trades Queensland (Code 40553)
OZTECH Trade Training College PTY LTD (Code 40997)
Additional information
Not applicable
Not Available
Visit Get Qualified Australia’s Trade Licensing page for more information surrounding licensing
Not Available
This qualification reflects the skills and knowledge required of individuals to perform a range of skills at trade-level for those working in furniture making and those involved in the manufacture and installation of fitted furniture typically in a kitchen, bathroom and related context. Installation skills may be applied to new or renovation work. The work is in a defined range of skilled operations, usually within a range of broader related activities involving known routines, methods and procedures, where some discretion and judgement is required in the selection of equipment, services or contingency measures and within known time constraints.
There are two pathways offered within the Certificate III in Cabinet Making targeting the skill requirements of free-standing furniture makers and kitchen and bathroom cabinet makers and installers.
Qualification descriptors for this qualification will depend on the pathway selection. Those completing Pathway 1 will achieve a MSF31113 Certificate III in Cabinet Making (Furniture) and those completing Pathway 2 will achieve a MSF31113 Certificate III in Cabinet Making (Kitchens and Bathrooms) .
The MSS30312 Certificate III in Competitive Systems and Practices is available for employees at this level who already possess technical skills and who require additional manufacturing practice skills above those available in this qualification.
Depending on the state and territory where work is undertaken licensing may relate to this qualification where the candidate is required to work on-site assisting in kitchen and bathroom installation. The licensing requirement will usually involve construction induction training. Where licensing is required the unit CPCCOHS1001A Work safely in the construction industry should be selected. If no licensing requirement exists e.g. where all work will be off-site then the unit MSAPMOHS200A Work safely should be selected.
No Related Qualifications found
